|
|
TRACK CHAIN & PAD STATION
| TRACK WRENCH
- Model MI-50, Mechanically driven,
electric impact wrench with 5000 ft lbs of torque, complete
with carriage, forty (40) lineal feet of travel rail, all control and
power cables, large push-buttons for forward/reverse control,
festoon cable carrier system, 5 H.P. motor and Ingersoll-Rand
impact head. Easily built to fit your current conveyor system or
order with Conveyor Assembly below!
|
|
Mattson MI-50
with Complete
Conveyor & Stands
|
CONVEYOR & STAND GROUP
a) Four (4), ten-foot (10 ft.) long, heavy-duty gravity conveyor
sections with large diameter, ball bearing rollers spaced @
4" centers.
b) Four (4), conveyor stands with guide blocks to
accommodate shoe lifter when ordered (see shoe lifter package)
|
|
| ADD-ON CONVEYOR STAND
- One (1) add-on stand is
required for Conveyor & Stand group if shoe lifter is not
ordered. Four (4) add-on stands are required if only shoe lifter
ordered. If shoe lifter and Conveyor Group are ordered
together, no additional stands are required.
|
| CONVEYOR RAMP
- One (1) heavy-duty, eight-foot (8ft.)
conveyor ramp to lead tracks from floor to track press level
conveyors. Rollers are placed at 3 inch centers and ramp has a
lead-on plate at the bottom end. Top end has a solid, heat
treated shaft with flange-mounted ball bearings to handle cable
load from winch.
|
|
| SHOE LIFTER PACKAGE
- Includes five (5) hydraulic lift
cylinders, all hoses, fittings and required cabling with shoe lift
rails and one (1) additional conveyor stand with lifter guide.
Shoe lift package can be fit to your existing conveyor if needed.
|
|
MI-50 with Conveyor |
| 3 H.P. HYDRAULIC POWER UNIT
- Compact, stand-alone power unit
for Retro-fit Shoe Lifter Package. Highly recommended option over tapping
into existing press power unit. (not shown)
|
|
|
|
